Adventure Fork
Adventure Fork
Adventure Fork
Adventure Fork
Adventure Fork
Adventure Fork
Adventure Fork
Adventure Fork
Adventure Fork
Adventure Fork
Adventure Fork
Adventure Fork
Adventure Fork
Adventure Fork
Adventure Fork
Adventure Fork

Adventure Fork

200-2010-001

€729,00
/
Tax included.

A carbon fork designed for bikepacking and endless exploration. Experience easier carrying of all possible accessories for everything from overnight endeavors to epic self-supported excursions with the ENVE Adventure Fork.

Rake

The ENVE Adventure fork provides a lighter weight option for bikepackers and frame builders, while still maintaining reliability and strength.

The dynamo light and charger routing is an integrated and protected solution to self-supported bike riders’ needs.

Finally, the fork chip option gives builders versatility in the fork by adjusting the axle-to-crown for different bike geometries for alternative bikepacking methods.

In a market that’s filled with heavy steel fork options, the ENVE Adventure fork offers bikepackers an opportunity to lighten their overall bike load through our trusted carbon fiber fork expertise.

  • Three-Pack Accessory Mounts
  • Fender and Rack Mounts
  • Reversible Drop-Out Chips for Adjustable Axle-To-Crown and Rake
  • Internal Dynamo Routing for Lights and Electronics Charging
  • Axle Spacing 12 x 100mm
  • Compatible Rotor Sizes 140/160 (49mm rake), 160/180 (55.5mm rake)
  • Tire Clearance: 700 x 53mm (49mm rake), 700 x 58mm (55.5mm rake)

DROP-OUT CHIP POSITION 49MM RAKE 55.5MM RAKE
Material Carbon Carbon
Accessory Mounts Yes (M5 Bolts) Yes (M5 Bolts)
Weight 575g 575g
Steerer Tube Length 350mm 350mm
Steerer Tube Taper 1.125" to 1.5" 1.125" to 1.5"
Rake 49mm 55.5mm
Axle To Crown 398mm 406mm
Brake Disc Disc
Brake Mount Flat Mount Flat Mount
Low Mount Rack Capacity 18kg, 40lbs 18kg, 40lbs
Front Mount Rack Capacity 10kg, 22lbs 10kg, 22lbs
3-Pack Mount Capacity 6kg per Side (2kg x 3 bolts) 6kg per Side (2kg x 3 bolts)
Axle Compatibility 12x100mm 12x100mm
Compatible Rotor Sizes 140mm, 160mm 160mm, 180mm
Max Tire Clearance 29" x 2.1" (700x53) / 27.5" x 2.4" 29" x 2.3" (700x58) / 27.5" x 2.6"
Torque Spec: Steerer Tube 5.5nm 5.5nm
Torque Spec: Axle 8nm 8nm
Torque Spec: Brake Bolts Defer to Brake Manufacturer Defer to Brake Manufacturer
Torque Spec: Accessory Bolts 2nm 2nm
Product Sku: 200-2010-001 200-2010-001

*Steertube not compatible with star nuts, please use a compression plug

SUPPORT

Installation Instructions

 

  • 5 stars: 1 (50%)
  • 4 stars: 0 (0%)
  • 3 stars: 0 (0%)
  • 2 stars: 1 (50%)
  • 1 star: 0 (0%)
S
Sam S. (United States)
The routing choices are nonsensical

Something you may miss if you're not reading the fine print closely: this fork will NOT allow for fully integrated front brake hose routing, the only option is for the brake hose to exit the little hole at the top of the non-drive fork arm. Also, the dynamo cable routing goes from the drive side fork to the exit hole at the front of the fork crown. There's the ability to make the wire then bend right back in and run through an opening to the inside of the steerer tube, but no holes in the steerer tube for wires to then go anywhere else. How ENVE imagines you'll cleanly route a wire to a rear dynamo light is a mystery to me. No part of this arrangement is compatible with the rest of the ENVE in-route ecosystem. If your vision is for fully integrated dynamo wire and brake hose routing, this won't do it.

If they were to add a hole in the front of the steerer tube and also a path to route the front brake hose from inside the steerer tube to the non-drive fork arm, then you would have maximum versatility to achieve any cable/hose routing plan, but as it currently works there's no good way to run things cleanly.

D
Doug T.

Bullet proof and lightweight makes this a great addition to any gravel/adventure whip in the stable. Cant recommend this fork highly enough

You might also like

Recently viewed